Home > News > Content
The Operation Method Of Tattoo Machine
- Jan 13, 2018 -

A: it should be prudent to adjust the needle length of the tattoo machine, because the length of the needle (the depth of the needle) determines the thickness of the line. In general, should avoid too long adjustment, because one: the lower needle is too shallow, the pigment will dissolve in the blood and spread, produce commonly known as "muddy open" situation. 2: the lower needle is too deep and can damage the dermis easily, causing the scar body. Therefore, we suggest that the lower needle depth of the tattoo machine should be within 1mm.

B: the Angle of the secant line should not be more than 20 °, because if the Angle is too large, needle, prone to line muddy open situation, and in vertical state under the needle Angle with the skin is the easiest color.

C: the use of transfer printing to do secant, should pay attention to the order of the secant, should according to the "bottom-up" "from right to left to complete the order of the", because such cases, not easily lead to scratch the transfer printing design situations.

Secant needle technique now.

1. When cutting the line, use the gradual approach to give priority to, keep smooth, do not stop, or there will be dotted lines and splash scenes.

2. The depth of the lower needle should be at 0.1-0.2cm, and avoid too deep. Otherwise, it is easy to cause the following phenomena:

A: the redness and swelling of the customer's decoration.

B: aggravating the customer's pain.

C: dissolve into the blood, cause the spread of pigment, produce "muddy open" phenomenon.

D: the line thickens and cannot achieve the original effect.